Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)
Archetype First Time Builder Bundle (Pre-Order)

Archetype First Time Builder Bundle (Pre-Order)

$1,100.00
/
Battery Recommendation

XT60 connection · 1100–1300mAh capacity · 100C or higher discharge

 

If you're looking for a pre-built drone, CLICK HERE

 

If you're looking for the frame only, CLICK HERE

 

Everything you need to build your first FPV drone — no guesswork, no missing tools.

Includes:
• Frame kit
• Full hardware set (all screws, standoffs, etc.)
• 2x sets of props
• Precision screwdriver set
• Wire cutters
• Sequre Soldering Iron
• Flux pen
• Soldering cleaner
• Tweezer set
• Smoke stopper


Please Note the following

  • This is all the parts needed to build the drone.
  • This DOES NOT include Goggles, remote, or batteries
  • Actual product may vary from the photos


Specs

    • Frame Weight: 150 g (Carbon, Hardware, and TPU)

    • Wheelbase: 198 mm (Supports up to 4.5” Props)

    • Arms: 5 mm Carbon

    • Main Stack: 20 mm & 30 mm compatible

    • Rear Stack: 20 mm & 25 mm compatible (VTX)

    • Motor Mounts: 12 mm M2

    • Top & Bottom Plates: 2.5 mm Carbon

    • Camera Mount: Supports 19 mm & 20 mm FPV cameras (with included 3D-printed adapters)

    • DJI Air Unit Riser: Included for optimal airflow

    • Material: T700 Carbon Fibre

    • 3D Printed Parts Kit: Landing gear, antenna mount, soft-mounted camera supports

    • Battery Strap: Included

    • Geometry: Squashed X

    • Motors: 
      - 4S Drone selection will use T-Motor 2004 3000kv
      - 6S Drone selection will use T-Motor 2004 1700KV 

    • Flight controller & ESC:
      F405 Mini Stack 20 x 20

    • Receiver:
      Speedybee ELRS Receiver

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

4-inch? 4.5-inch? Why not both.

Fits setups up to 4.5-inch — no compromises, no adjustments.

T700 CARBON FIBER

The gold standard in carbon

Integrated battery port

No clutter. Just connection.

What's In the box?

  • Archetype Frame
  • F405 Mini Stack 20 x 20
  • ELRS Receiver (If selected)
  • 2 x Prop Set
  • 4 Selected Motors
  • Selected VTX Option
  • 1 Cable Cutter
  • 1 set of Allen Keys
  • 1 Set Of Tweezers
  • 1 Flux Pen
  • 1 Soldering Iron Cleaner
  • 1 Smoke Stopper
  • 1 Sequre Soldering Iron

Want to build your own drone?

Answer a few questions, and we'll recommend a kit for you!
Find Now!

Customer Review

Back to All Products